Skip to content

Vehicles and aircraft · Toulouse, France · 1962–1976

Concorde supersonic airliner development

Estimated at £150-170 million when Britain and France signed the 1962 treaty, Concorde cost an estimated £1.5-2.1 billion and entered service in 1976, about six years late.

+1025%cost overrun
6 years lateagainst the first plan
$18.4 billionactual cost in 2025 dollars
Over budget and lateconfidence: disputed

Concorde as a Gantt chart: planned vs actual

Schedule by phase
PhasePlannedActual
Treaty and design definitionNov 1962 – ?Nov 29, 1962 – Feb 1965
Prototype construction? – 1966Feb 1965 – Dec 1967
Prototype flight testing1966 – ?Mar 2, 1969 – Oct 9, 1975
Certificationnot publishedOct 9, 1975 – Dec 5, 1975
Entry into service1970 – 1970Jan 21, 1976 – Jan 21, 1976

The plan

On 29 November 1962 Britain and France signed a treaty to design and build a supersonic airliner together1. The work was split between the British Aircraft Corporation and Sud Aviation, later Aérospatiale, with Rolls-Royce and Snecma sharing the Olympus 593 engines1. At British insistence, the treaty carried heavy penalties for cancellation1.

When the agreement was signed, the British government put the cost of development at £150-170 million, a figure a minister later confirmed to the House of Commons2. The partners expected roughly eight years of development and testing, which pointed to airline service around 19705. Earlier studies had already moved the number once: according to a BBC Timewatch documentary, estimates had risen from £70 million to £150 million before the treaty was signed1.

The plan was later rebaselined in public. By October 1970 the agreed government estimate was £825 million at June 1970 prices, covering costs from November 1962 to the end of the program3.

Official rebaseline: 1970 government estimate (June 1970 prices), £825 million (outturn +118% against it).

What actually happened

Treaty and design definition, 1962–1965

The first years went into turning a specification into an aircraft. Construction of two prototypes began in February 1965: 001 at Toulouse and 002 at Filton, near Bristol1. By then the estimate was already climbing; a written answer in February 1967 put it at £450 million plus a £50 million contingency, three times the 1962 figure2.

Prototype construction, 1965–1968

Concorde was designed to cruise at Mach 2.02, a speed no airliner had sustained, and the engine choice evolved from the existing Olympus Mk 320 to the new Olympus 5931. The prototypes took about four years from the start of construction to first flight1. Interest from airlines was strong at this point: by the first flight, 16 airlines held options on 74 aircraft15.

Flight testing, 1969–1975

Prototype 001 first flew from Toulouse on 2 March 1969 with André Turcat at the controls, and the British-built 002 followed on 9 April 19691. Concorde went supersonic on 1 October 19691. In October 1970 ministers reported that the estimate had risen by £95 million in a year, to £825 million, of which £35 million was for propulsion improvements and £40 million for pay and price increases3. They also promised a thorough review with France once the current tests were complete3.

Testing continued for six more years. In early 1973 Pan Am dropped its options, and the other airlines followed5. In the end only Air France and British Airways bought the aircraft, and the last five unsold production aircraft were transferred to them in 1979 and 1980 for a nominal sum4.

Certification and entry into service, 1975–1976

France issued its certificate of airworthiness on 9 October 1975 and the UK Civil Aviation Authority followed on 5 December 19751. On 21 January 1976 Air France flew Paris to Rio de Janeiro and British Airways flew London to Bahrain, the first scheduled supersonic passenger services4. Through March 1976 the program had cost an estimated £1.5-2.1 billion in 1976 pounds1.

Production and service life, 1976–2003

Twenty Concordes were built, of which 14 entered airline service4. The 16 production aircraft cost £654 million, of which the governments recovered £278 million from airline sales4. The fleet carried about 2.5 million passengers before its retirement in October 20034.

Why it went the way it did

First-of-a-kind technology

Nobody had built a supersonic airliner before, so the 1962 estimate priced a design that did not yet exist. Each round of engineering revealed new work, and Hansard records the estimate rising in steps, from £150-170 million to £500 million and then £825 million23. Bent Flyvbjerg lists Concorde's overrun at 1,100 percent, in the same company as the Sydney Opera House6.

An estimate that left out scope

Later estimates covered work the first one did not, including development needed after certification and improvements to the propulsion system3. Some of the growth was therefore scope that was always going to be needed but was never priced at go-ahead, a common feature of the gap between estimates and outcomes.

A treaty that made stopping expensive

The cancellation penalties written into the 1962 treaty meant that neither government could leave without paying1. Reviews took place, as in 1970, but the cost of stopping was always weighed against the cost of continuing, and the program carried on3.

Inflation over a long program

The late 1960s and the 1970s were a period of high inflation, and pay and price increases alone added £40 million to the estimate in a single year3. The nominal rise from £160 million to about £1.8 billion overstates real growth, though real growth was still large12.

Lessons for project managers

  1. Price the whole program at go-ahead. Concorde's first estimate left out post-certification work that later appeared as overrun. Good project planning defines the full scope before a number is announced.
  2. Build exit reviews into binding agreements. Heavy cancellation penalties kept the program alive through every rise in cost. Fixed decision gates, with agreed criteria, give partners a real choice at each stage.
  3. Measure schedule risk in years for novel technology. Service started about six years after the 1970 target. A realistic deadline for a first-of-a-kind product needs contingency sized to the unknowns, not to the last similar project.
  4. Separate technical success from commercial success. Concorde met its Mach 2 transatlantic mission, yet only 14 aircraft entered airline service. Track demand assumptions as closely as engineering milestones.

Concorde by the numbers

PlannedActualSource
Development cost£150-170 million (November 1962)£1.5-2.1 billion (1976 pounds, through March 1976)[1]
Rebaselined estimate£825 million (June 1970 prices)£1.5-2.1 billion (1976 pounds)[3]
Treaty signed29 November 196229 November 1962[1]
First flight19662 March 1969[1]
Entry into service197021 January 1976[4]
Aircraft built74 options from 16 airlines20 built, 14 in airline service[4]

From the history of managing work: Kahneman and Tversky name the planning fallacy (1977–1979), Reference class forecasting (2002–2006).

Frequently asked questions about Concorde

How much over budget was Concorde?
At the 1962 treaty, development was estimated at £150-170 million2. Through March 1976 the program had cost an estimated £1.5-2.1 billion in 1976 pounds, roughly ten times the original figure in nominal terms1. Flyvbjerg lists the overrun at 1,100 percent6. Inflation explains part of the increase, and some of it was scope, such as post-certification work, that the first estimate left out3.
How long did it take to develop Concorde?
From the treaty of 29 November 1962 to the first scheduled flights on 21 January 1976 took just over 13 years1. The prototype first flew in March 1969, and certification came in October and December 19751. The partners had expected about eight years of development and testing5.
Why was Concorde delayed?
Concorde was the first supersonic airliner, and its design and engines needed more development than the 1962 plan allowed. Estimates rose repeatedly as engineering progressed, including £35 million for propulsion improvements in a single year3. Flight testing then ran from 1969 to 1975 before both countries certified the aircraft1.
Who built Concorde?
The British Aircraft Corporation and Sud Aviation, later Aérospatiale, built the airframe, and Rolls-Royce and Snecma built the Olympus 593 engines1. The two governments paid for development, and prototypes were assembled at Toulouse and Filton1. Air France and British Airways were the only airlines to operate it in regular long-term service4.
How many Concordes were built?
Twenty were built: two prototypes, two pre-production aircraft and 16 production aircraft4. Fourteen entered airline service, seven each with Air France and British Airways4. At the first flight in 1969, 16 airlines had held options on 74 aircraft, but those options were cancelled from 1973 onward15.

Sources

  1. Concorde, Wikipedia (accessed October 25, 2026)
  2. Concord Aircraft (Cost), written answer, 10 February 1967, UK Parliament, Historic Hansard (accessed October 25, 2026)
  3. Concorde, House of Commons, 28 October 1970, UK Parliament, Historic Hansard (accessed October 25, 2026)
  4. Concorde History, Aerospaceweb.org (accessed October 25, 2026)
  5. Concorde Flies Passengers at Supersonic Speeds, EBSCO Research Starters (accessed October 25, 2026)
  6. What You Should Know About Megaprojects, and Why: An Overview, Bent Flyvbjerg, Project Management Journal (arXiv preprint) (accessed October 25, 2026)

Data: Kanbanchi, kanbanchi.com/gantt-chart-tool/great-projects, licensed CC BY 4.0. Planned means the first publicly approved budget and schedule; see the methodology. Last updated October 25, 2026.

Plan your own project with a Gantt chart

The people who built these had paper and pencils. You have a Gantt chart that lives in Google Drive.

See Kanbanchi’s Gantt chart Start your free trial Back to all 100 great projects