Buildings · New York City, United States · 1929–1931
Empire State Building
The Empire State Building opened on its planned date of 1 May 1931 after a 410-day build, costing $40.9 million including demolition against a $50 million budget.
Empire State Building as a Gantt chart: planned vs actual
- Planned
- Actual
- Forecast
- Milestones (planned, actual)
- ↳ Dependency
- Today
| Phase | Planned | Actual |
|---|---|---|
| Demolition of the Waldorf-Astoria | not published | Oct 1, 1929 – Mar 1930 |
| Excavation and foundations | not published | Jan 22, 1930 – Mar 1930 |
| Steel frame erection | ? – Oct 1, 1930 | Apr 1, 1930 – Sep 19, 1930 |
| Enclosure and fit-out | ? – Apr 23, 1931 | Jun 1930 – Apr 11, 1931 |
| Opening | May 1, 1931 – May 1, 1931 | May 1, 1931 – May 1, 1931 |
Open in the explorer of 100 projects · Compare with One World Trade Center (a modern Manhattan tower that took far longer) · What is a Gantt chart? A free lesson
The plan
The Empire State Building was a speculative office tower developed by Empire State Inc., formed by former General Motors executive John J. Raskob with Coleman du Pont, Pierre S. du Pont, Louis G. Kaufman and Ellis P. Earle, with former New York governor Al Smith at its head4. The site was the old Waldorf-Astoria hotel on Fifth Avenue, which closed on 3 May 19292. Architects Shreve, Lamb and Harmon worked to a fixed brief: William Lamb was responsible for the design and Richmond Shreve for the firm's administration and planning5. The plans were devised within a budget of $50 million2.
The schedule was just as fixed. The building had to open on 1 May 1931, and the programme worked back from that date: steel to top out around the start of October 1930 and the structure to be finished in late April 19312. Contractor Starrett Brothers and Eken was to deliver the whole job in about 18 months12.
The design changed fifteen times before it was fixed, as the developers pushed for the title of world's tallest building2. Those iterations happened on paper, before construction, which is one reason the site work could run to a rigid timetable.
What actually happened
Demolition of the Waldorf-Astoria, October 1929–early 1930
Demolition of the hotel began on 1 October 19292. Rather than wait for the site to be cleared, the builders overlapped demolition with the next phase, an approach Jacobsson and Wilson describe as an early form of concurrent engineering and fast-track construction1.
Excavation and foundations, January–March 1930
The steel contract was let on 12 January 1930 and excavation began ten days later, on 22 January2. Construction of the building proper started on 17 March 19302.
The Skyscraper Museum describes the whole job as running within twenty months from contracts to completion, with about eleven months of construction on the tower itself3. That compression depended on suppliers as much as on the site: steel was fabricated and milled to exact specifications before delivery, so each piece could be hoisted and set soon after it arrived3.
Steel frame, April–September 1930
The frame rose at up to four and a half stories per week2. On 14 August 1930 there were 3,439 workers on site in a single day2. Some 57,000 tons of structural steel were fabricated to exact specifications and lifted into place3. The steel topped out on 19 September 1930, twelve days ahead of schedule2.
Enclosure and fit-out, 1930–April 1931
Masonry, windows and services followed the steel floor by floor: 6,400 windows, 67 elevators in seven miles of shafts and 62,000 cubic yards of concrete3. The structure was finished on 11 April 1931, 410 days after construction began and twelve days ahead of schedule2. According to official accounts, five workers died during construction2.
Opening, 1 May 1931
The building officially opened on 1 May 1931, with President Herbert Hoover pressing a button in Washington that switched on its lights for the first time24. It cost $40,948,900 including the demolition of the Waldorf-Astoria, well under the $50 million budget2. The office market it opened into had collapsed, and so little space was let that critics called it the Empty State Building2.
Why it went the way it did
A frozen design and a fixed date
The fifteen design iterations happened before construction, not during it2. With a fixed opening date and a fixed brief, the contractor could plan the work as a sequence rather than a negotiation. Jacobsson and Wilson group this under strategic explanations for the project's speed1.
Construction as a production line
The architects' planning is credited with getting construction done in about a year5, and Starrett Brothers and Eken ran the site like an assembly line inspired by Henry Ford, with trades following each other up the building on a tight cycle1. Steel arrived fabricated to exact dimensions3. The result was a pace of four and a half stories a week2. A schedule like this is essentially a chain of dependent tasks, and it is the kind of plan that a Gantt chart makes legible: each trade's bar starts when the one below it clears the floor. In process terms, careful planning came first and fast execution followed, the order laid out in the project management process.
The Depression lowered prices
Context mattered as much as method. Work began just as the economy fell, and Jacobsson and Wilson cite the downturn as one reason the building proper cost about $24.7 million against an estimate of $43 million1. The Skyscraper Museum gives a building cost of about $25 million, consistent with that figure3. Falling wages and material prices helped the budget; they also emptied the offices the building was meant to fill2.
Lessons for project managers
- Freeze the design before the first shovel. Fifteen iterations on paper were cheaper than one on site2. Fix scope early and protect it.
- Overlap phases only with detailed logistics. Demolition, excavation and erection overlapped here because deliveries and trades were sequenced precisely1. Overlap without that detail produces congestion, not speed.
- Separate luck from skill when you review. Part of the underrun came from Depression prices, not management1. A project schedule review should say which gains you could repeat and which you could not.
Empire State Building by the numbers
| Planned | Actual | Source | |
|---|---|---|---|
| Cost (whole project) | $50 million budget (1929) | $40,948,900 including demolition (1931) | [2] |
| Cost, building only | $43 million estimate | about $24.7 million | [1] |
| Cost in 2025 US dollars | about $940 million | about $870 million | [2] |
| Start (demolition) | 1 October 1929 | 1 October 1929 | [2] |
| Steel topped out | about 1 October 1930 | 19 September 1930 | [2] |
| Structure complete | about 23 April 1931 | 11 April 1931 | [2] |
| Opening | 1 May 1931 | 1 May 1931 | [2] |
| Peak workforce | not published | 3,439 on 14 August 1930 | [2] |
From the history of managing work: Henry Gantt charts work against time (c. 1910–1915), The Principles of Scientific Management (1911), Scheduling the Hoover Dam (1931–1936).
Frequently asked questions about Empire State Building
- How long did it take to build the Empire State Building?
- The structure was finished 410 days after construction began, on 11 April 19312. Counting from the start of demolition of the Waldorf-Astoria on 1 October 1929, the whole project took about 19 months to the opening on 1 May 19312. Construction on the building itself started on 17 March 19302.
- How much did the Empire State Building cost?
- It cost $40,948,900, including the demolition of the Waldorf-Astoria, against a planning budget of $50 million2. The building alone cost about $24.7 million against an estimate of $43 million, according to Jacobsson and Wilson1. In 2025 dollars the total is roughly $870 million.
- Was the Empire State Building finished on time?
- Yes. The steel topped out on 19 September 1930 and the structure was completed on 11 April 1931, each twelve days ahead of schedule, and the building opened on its planned date of 1 May 19312. The early finish came from overlapping phases and a site run like a production line1.
- Who built the Empire State Building?
- The general contractor was Starrett Brothers and Eken, working to designs by Shreve, Lamb and Harmon for Empire State Inc., the company of John J. Raskob and Al Smith2. At the peak, 3,439 workers were on site in a single day2.
- Why was the Empire State Building built so fast?
- Jacobsson and Wilson give three kinds of reason: strategic choices such as a fixed brief and date, an assembly-line method on site inspired by Henry Ford, and the context of the Depression, which made labor and materials cheap and plentiful1. Overlapping demolition, excavation and erection, an early form of fast-track construction, also saved months1.
Sources
- Revisiting the construction of the Empire State Building: Have we forgotten something?, Jacobsson and Wilson, Business Horizons 61(1), 2018 (IDEAS/RePEc listing) (accessed October 25, 2026)
- Empire State Building, Wikipedia (accessed October 25, 2026)
- Building the Empire State, The Skyscraper Museum (accessed October 25, 2026)
- History of the Empire State Building, Empire State Realty Trust (esbnyc.com) (accessed October 25, 2026)
- Shreve, Lamb & Harmon, Wikipedia (accessed October 25, 2026)
Data: Kanbanchi, kanbanchi.com/gantt-chart-tool/great-projects, licensed CC BY 4.0. Planned means the first publicly approved budget and schedule; see the methodology. Last updated October 25, 2026.